Publications

Google Scholar:  https://scholar.google.com/citations?user=bcv5q2gAAAAJ&hl=en&oi=ao

Journal

List of Journal Publications (the * symbol refers to the corresponding author)
1) Yang, S., Clare, A.T., Bennett, C. and Jin, X.*, 2024. Informing Directed Energy Deposition Strategies Through Understanding the Evolution of Residual Stress. Additive Manufacturing, 79, p.103907.
2) Maroju, N.K., Jin, X.* and Pasam, V.K., 2024. Analyzing the effect of elliptical vibration assistance in machining of Zr-based BMG. Journal of Manufacturing Processes, 119, pp.156-168.
3) Shi, J., Feng, X., Jin, X. and Cao, H.*, 2024. The Prediction of 3D Surface Topography in a High-speed Micro-milling Process with Aerostatic Spindle. Tribology International, p.109388.
4) Li, B., Song, C., Lu, Z., Jin, X.* and Zhao, L., 2024. Tool Wear Prediction in Edge Trimming of MD CFRP Considering Interlaminar Effect. Journal of Manufacturing Processes, 109, pp.481-500.
5) Fazlali M., Jin X.*, 2023. Time-Varying Tool-Chip Contact in the Cutting Mechanics of Shear Localization. ASME Journal of Manufacturing Science and Engineering, pp.1-24.
6) Yang, S., Jin, X.*, Engin, S., Kountanya, R., El-Wardany, T. and Lee, S.Y., 2023. Effect of Cutting Fluids on Surface Residual Stress in Machining of Waspaloy. Journal of Materials Processing Technology, 322, p.118170.
7) Song C., Jin X.*, 2023. Frictional Damage Mechanism for Matrix Failure in Cutting Unidirectional CFRP. ASME Journal of Manufacturing Science and Engineering, 145(6), p.061005.
8) Li B., Lu Z., Jin X.*, Zhao L., 2023. Tool Wear Prediction in Milling CFRP with Different Fiber Orientations based on Multi-channel 1DCNN-LSTM, Journal of Intelligent Manufacturing, pp.1-20.
9) Zhang, W., Zhang, X., Jin, X., Zhang, H., Zhao, W.*, 2023. Dynamic modeling and harmonic analysis of surface-mounted three-phase AC permanent magnet synchronous motor. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.
10) Song C., Peng Z., Zhao D., Jin X.*, 2023. A Whole Discretization Method for Milling Stability Prediction Considering the Discrete Vibration Velocities. Journal of Sound and Vibration, p.117687.
11) Fazlali, M., Ponga, M., Jin, X.*, 2022. Predictive Model of Chip Segmentation in Machining of High-strength Metallic Alloys. Journal of Materials Processing Technology, 308, p.117723.
12) Shi J., Jin, X., Cao H.*, 2022. Chatter Stability Analysis in Micro-milling with Aerostatic Spindle Considering Speed Effect. Mechanical Systems and Signal Processing, 169, p.108620.
13) Maroju, N.K., Jin, X.*, 2022. Effect of Speed Ratio on Shear Angle and Forces in Elliptical Vibration Assisted Machining. Journal of Materials Processing Technology, p.117498.
14) Fazlali M., Ponga M., Jin X.*, 2022. Analytical Modeling of Shear Localization in Orthogonal Cutting Processes. ASME Journal of Manufacturing Science and Engineering, 144(2): 021013.
15) Song, C., Jin, X.*, 2022. Analytical Modeling of Chip Formation Mechanism in Cutting Unidirectional Carbon Fiber Reinforced Polymer. Composites Part B: Engineering, 239, p.109983.
16) Jin X.*, Song C., 2022. Orthogonal Cutting Mechanics of Multi-directional Carbon Fiber Reinforced Polymer with Interlaminar Bonding Effect, CIRP Annals – Manufacturing Technology.
17) Jin, F., Bao, Y., Li, B., Jin, X.*, 2022. Tool Wear Prediction in Edge Trimming of Carbon Fiber Reinforced Polymer Using Machine Learning with Instantaneous Parameters. Journal of Manufacturing Processes, 82, pp.277-295.
18) Jiang, Z., Maroju, N.K., Wan, S., Jin, X.*, 2022. Modelling and Compensation of machine geometric errors for the surface texturing process. International Journal of Mechatronics and Manufacturing Systems, 15(4), pp.286-309.
19) Shi J., Cao H., Jin X.*, 2022. Dynamics of 5-DOF Aerostatic Spindle with Time-varying Coefficients of Air Bearing. Mechanical Systems and Signal Processing, 172, p.109005.
20) Ma W., Jin X., Yu J., Yang Y.*, Liu X., Shen R., 2022. Oppositely Oriented Series Multiple Tuned Mass Dampers and Application on a Parallel Machine Tool. Mechanical Systems and Signal Processing, 163:108196.
21) Yan, P.*, Wang, Y., Jin, X., Zhu, J., Jiao, L., Qiu, T., Wang, X., 2022. Effect of Cutting Fluid on High Strain Rate Dynamic Mechanical Property and Cutting Performance of Nickel Based Superalloy. Journal of Materials Research and Technology, 17, pp.1146-1158.
22) Huang, F., Jin, X.*, 2021. Surface Texture Generation Using High-feed Milling with Spindle Speed Modulation. Precision Engineering, 72.
23) Ma W., Yang Y., Jin X.*, 2021. Chatter Suppression in Micro-milling using Shank- mounted Two-DOF Tuned Mass Damper, Precision Engineering, 72.
24) Song C., Jin X.*, 2021. Fracture Angle Prediction for Matrix Failure of Carbon-Fiber- Reinforced Polymer Using Energy Method. Composites Science and Technology, 211, p.108869.
25) Xu, X., Jin, X.*, 2021. 3-D Finite Element Modeling of Sequential Oblique Cutting of Unidirectional Carbon Fiber Reinforced Polymer. Composite Structures, 256, p.113127.
26) Yan D.*, Jin X., 2020. Characterization of Shear Band Formation and Microstructure Evolution during Orthogonal Cutting of Ti-5553: Part I—Shear Angle, Strain and Strain Rate. Journal of Materials Engineering and Performance, 29(6), pp.4063-4074.
27) Song C., Jin X.*, 2020. Shearing-buckling Mechanism in Orthogonal Cutting of Unidirectional Carbon Fiber Reinforced Polymer. Journal of Materials Processing Technology, 280, p.116612.
28) Shi J., Cao H., Maroju N.K., Jin X.*, 2020. Dynamic Modeling of Aerostatic Spindle with Shaft Tilt Deformation. ASME Journal of Manufacturing Science and Engineering, 142(2).
29) Hu Q., Chen Y., Jin X., Yang J.*, 2020. A Real-time C3 Continuous Tool Path Smoothing and Interpolation Algorithm for Five-axis Machine Tools. ASME Journal of Manufacturing Science and Engineering, 142(4).
30) Maroju N.K., Jin X.*, 2019. Mechanism of Chip Segmentation in Orthogonal Cutting of Zr-Based Bulk Metallic Glass. ASME Journal of Manufacturing Science and Engineering, 141(8), p.081003.
31) Shi J., Cao H., Jin X.*, 2019. Investigation on the Static and Dynamic Characteristics of 3-DOF Aerostatic Thrust Bearings with Orifice Restrictor. Tribology International, 138, 435-449.
32) Gao J., Jin X.*, 2019. Effects of Ultrasonic Vibration Assistance on Chip Formation Mechanism in Cutting of Ti-6Al-4V, ASME Journal of Manufacturing Science and Engineering, 141(12): 121007.
33) Wan S., Jin X.*, Maroju N.K., Hong J., 2019. Effect of Vibration Assistance on Chatter Stability in Milling. International Journal of Machine Tools and Manufacture, 145, p.103432.
34) Wan S., Maroju N.K., Jin X.*, 2019. Development of a 2D Vibration Stage for Vibration- Assisted Micro Milling. Instrumentation Journal. 6(1), 98-108.
35) Hu Q., Chen Y., Jin X., Yang J.*, 2019. A Real-Time C3 Continuous Local Corner Smoothing and Interpolation Algorithm for CNC Machine Tools. ASME Journal of Manufacturing Science and Engineering. 141(4).
36) Park C.I., Wei Y., Hassani M., Jin X., Lee J., Park S.*, 2019. Low Power Direct Laser- Assisted Machining of Carbon Fibre-reinforced polymer. Manufacturing Letters. 22, 19- 24.
37) Wan S., Li X.*, Su W., Yuan J., Hong J. and Jin X., 2019. Active Damping of Milling Chatter Vibration via a Novel Spindle System with an Integrated Electromagnetic Actuator. Precision Engineering. 57, 203-210.
38) Maroju N.K., Yan D., Xie B., Jin X.*, 2018. Investigations on Surface Microstructure in High-speed Milling of Zr-based Bulk Metallic Glass. Journal of Manufacturing Processes. 35: 40-50.
39) Park S.*, Wei Y., Jin X., 2018. Direct Laser Assisted Machining with a Sapphire Tool for Bulk Metallic Glass. CIRP Annals – Manufacturing Technology. 67(1): 193-196.
40) Maroju N.K., Mahmoodi M., TabkhPaz M., Park S.S., Jin X.*, 2017. Characterization and Micro End Milling of Graphene Nano Platelet and Carbon Nanotube Filled Nanocomposites. Journal of Materials Processing Technology, 249, pp.96-107.
41) Maroju N.K., Krishna V., Jin X.*, 2017. Investigations on Feasibility of Low-Frequency Vibration-Assisted Turning. International Journal of Advanced Manufacturing Technology, 91(9-12), pp.3775-3788.
42) Maroju N.K., Krishna V., Jin X.*, 2017. Assessment of High and Low Frequency Vibration Assisted Turning with Material Hardness. International Journal of Machining and Machinability of Materials. 19(2), pp.110-135.
43) Jin X.*, Koya N.G., 2016. Prediction of Coupled Torsional–axial Vibrations of Drilling Tool with Clamping Boundary Conditions. CIRP Journal of Manufacturing Science and Technology. 13, pp. 24-36.
44) Jin X.*, Koya N.G., 2016. Investigation of Warping Effect on Coupled Torsional-axial Vibration of Drilling Tool. International Journal of Advanced Manufacturing Technology. 86(9-12), pp.2961-2974.
45) Zhu L.*, Jin X., Liu C., 2016. Experimental Investigation on 3D Chip Morphology Properties of Rotary Surface During Orthogonal Turn-milling of Aluminum Alloy. International Journal of Advanced Manufacturing Technology. 84(5-8), pp.1253-1268.
46) Jin X.*, Xie B., 2015. Experimental Study on Surface Generation in Vibration-Assisted Micro-Milling of Glass. The International Journal of Advanced Manufacturing Technology, 81(1-4), pp.507-512.
47) Jin X.*, Poudel A., 2015. Experimental Study on High Frequency Chatter Attenuation in 2-D Vibration Assisted Micro Milling Process. Journal of Vibroengineering, 17(6), pp. 2743-2754.
48) Li Y., Cao H.*, Niu L., Jin X., 2015. A General Method for the Dynamic Modeling of Ball Bearing–Rotor Systems. ASME Journal of Manufacturing Science and Engineering. 137(2), 021016.
49) Xi S., Cao H.*, Chen X., Zhang X., Jin X., 2015. A Frequency-Shift Synchrosqueezing Method for Instantaneous Speed Estimation of Rotating Machinery. ASME Journal of Manufacturing Science and Engineering. 137(3), 031012.
50) Jin X., Altintas Y.*, 2013. Chatter Stability Model of Micro-Milling with Process Damping. ASME Journal of Manufacturing Science and Engineering. 135(3), 031011.
51) Jin X., Altintas Y.*, 2012. Prediction of Micro-milling Forces with Finite Element Method. Journal of Materials Processing Technology. 212(3), 542-552.
52) Jin X., Altintas Y.*, 2011. Slip-line Field Model of Micro-cutting Process with Round Tool Edge Effect. Journal of Materials Processing Technology. 211(3), 339-355.
53) Y. Altintas*, Jin X., 2011. Mechanics of Micro-milling with Round Edge Tools. CIRP Annals – Manufacturing Technology. 60(1), 77–80.
54) Jin X., Liu Q.*, Yuan S., 2007. Virtual Instrument Based Testing and Analysis System for Dynamic Characteristics of NC Machine Tools. Chinese Journal of Manufacturing Technology and Machine Tools. 77-80.

Conference

1) Yang, S., Jin, X., Engin, S., Kountanya, R., and El-Wardany, T., 2024. Coupling Effect of Shear Localization on Surface Residual Stress in Machining of Waspaloy. ASME Manufacturing Science and Engineering Conference (MSEC), Knoxville, USA.
2) Song C., Jin X., 2023. Nonlinearity and Periodicity in Machining Carbon Fiber Reinforced Polymer. SME North American Manufacturing Research Conference (NAMRC 51), New Brunswick, USA.
3) Fazlali M., Ponga M., Jin X., 2022. Analysis of the Unique Mechanics of Shear Localization in Metal Cutting Processes, ASME Manufacturing Science and Engineering Conference (MSEC), West Lafayette, USA.
4) Yang, S., Fazlali, M., Jin, X., 2022. Coupled Eulerian-Lagrangian Model for Residual Stress Prediction in Orthogonal Cutting of Waspaloy, SME North American Manufacturing Research Conference (NAMRC 50), West Lafayette, USA.
5) Song C., Jin X., 2019, Chip Formation in Orthogonal Cutting of Unidirectional CFRP. The 8th International Conference on Virtual Machining Process Technology, Vancouver, Canada.
6) Wan S., Jin X., 2019. Prediction of Chatter Stability in Vibration Assisted Milling. The 8th International Conference on Virtual Machining Process Technology, Vancouver, Canada.
7) Maroju N.K., Jin X., 2019. Chip formation in Machining Zr-based Bulk Metallic Glass. The 8th International Conference on Virtual Machining Process Technology, Vancouver, Canada.
8) Maroju N.K., Jin X., 2018. Surface Texturing of Bulk Metallic Glass using Vibration Assisted Inclined Milling. The 7th International Conference on Virtual Machining Process Technology, Hamilton, Canada.
9) Maroju N.K., Jin X., 2018. Vibration-assisted Dimple Generation on Bulk Metallic Glass. Procedia Manufacturing, 26, pp.317-328. College Station, USA, 2018.
10) Maroju N.K., Jin X., 2017. Effects of Vibration Assistance on Surface Residual Stress in Grinding of Ti6Al4V Alloy. Procedia Manufacturing, Los Angeles, USA, 10, pp.171-182.
11) Xie B., Maroju N.K., Yan D. P., Jin X., 2017. Material Behavior in Micro Milling of Zirconium Based Bulk Metallic Glass. In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (pp. 363-373). Springer International Publishing. San Diego, USA.
12) Jin X., Xie B., 2016. Experimental Investigation on Machinability in Micro Milling of Zirconium based Bulk Metallic Glass. The 5th International Conference on Virtual Machining Process Technology, Taipei, Taiwan.
13) Maroju N.K., Jin X., Cong W., 2016. Vibration Assisted Grinding of Additively Manufactured Stainless Steel. Proceedings of the 4M/ICOMM 2016 Conference, Irvine, USA.
14) Jin X., Koya N., 2015. Modeling of Micro Drill Dynamics Based on 2-D Finite Element Method. Proceedings of the 4M/ICOMM 2015 Conference, Milan, Italy.
15) Jin X., 2014. Identification of Process Damping Coefficient Based on Material Constitutive Property. Proceedings of the ASME International Manufacturing Science and Engineering Conference, Detroit, USA.
16) Jin X., Altintas Y., 2012. Identification of Process Damping with Tool Flank Wear Effect. Proceedings of the 1st International Conference on Virtual Machining Process Technology, Montreal, Canada.
17) Jin X., Altintas Y., 2011. Prediction of Cutting Forces in Micro-milling Process using Finite Element Method. Proceedings of the 23rd CANCAM, Canadian Congress of Applied Mechanics, Vancouver, Canada.
18) Jin X., Altintas Y., Ng E.G., 2010. Finite Element Modeling of Edge Effect in Microcutting. Proceedings of the Canadian Society of Mechanical Engineering, Victoria, Canada.
19) Jin X., Altintas Y., 2010. Slip-line Field Model of Micro-Cutting Process with Round Tool Edge Effect. Proceedings of the CIRP 2nd International Conference Process Machine Interactions, Vancouver, Canada.